AlarmCalm uses fast hardware, powerful software and intelligent loop devices to build a total solution to false alarms that’s
powerful and easy to configure. The AlarmCalm Button is a fully intelligent verification device that is installed on the loop and works with the AlarmCalm software to allow occupants to acknowledge a fire alarm signal locally, if they believe it has been caused by say smoke from toast or shower vapour.
Features:
• Complete Case-and-Effect : In depth control over alarm verification and investigation delays to outputs.
• Customised Management for any Site : Divide your building(s) into Building Areas, each with quickly applied group or unique false alarm management settings. 200 Building Areas per panel or 40,000 per network.
• Unlimited points : No restriction to the number of points in a Building Area and you can configure by point.
• Global Acknowledgement : Panel inputs can be programmed to manage verification and output delays.
• Full Event Log : All verification and output delays recorded in panel event logs.
Flexible Verification : Set verification by Building Area, day/night, on or off, change verification times, verification by second device of device mode change.
• Multiple Verification Inputs and Outputs : Inputs can include optical, heat and multisensors, callpoints and AlarmCalm Button or other input modules. Outputs can be sounders, beacons and relays etc. Sounder ring styles can be configured.
• Failsafe Operation : Total control over verification times. Users can only extend Verification once. Set max number of areas in Verification before full Fire is signaled.
• Easy Management of Outputs : Output delays are handled in exactly the same way as Verifications, making set up very simple.
